Merrychef 402s - Manual (Page 9)

9
PROGRAM NUMBER PADS
These pads are used for setting the cooking time in 1
second steps to a maximum of 10 minutes.
They are also used for storing and recalling programs
from 0-499
MenuKey
The MenuKey System automatically changes all the
cooking programs with an electronic key and allows
program names to be identified
PREHEAT & COOL DOWN
The preheat pad switches the oven into and out of Pre-
Heat Mode. To enter cool down mode press and hold
the Pad for 5 seconds.
PROGRAM
Activates program mode for storing and running pre-set
programs from memory. Programs can also be
downloaded from a MenuKey
(see MenuKey: CHANGING OVEN MENU PROGRAMS) CANCEL PAD
Cancels all timed cooking cycles, pre-programmed
operations and stops the microwave energy. It does not
alter the oven temperature. If the oven is hot, food will
continue to cook and should be removed from the oven
immediately. This pad will also cancel any incorrect
operations. It will not erase programs.
MAIN DISPLAY PANEL
Shows the principal functions of the oven.
When cooking, the time remaining counts down.
Also displays error messages and oven temperature.
When storing and recalling a program the display
indicates the program number and details.
CONTROL PANEL
FUNCTION PAD PROGRAM NUMBER PADS PROGRAM PAD
PREHEAT &
COOL DOWN PAD
DISPLAY PANEL MenuKeY
SOCKET START PAD
CANCEL PAD
Start up sequence and oven specification
When the oven is switched on the WAWA logo is displayed followed by
information about the oven:
Model No.
Software
MenuKey serial No.
The oven then displays the cold standby screen.
MODEL NUMBER :402S
SOFTWARE :
MENUKEY2 CODE :000
MENUKEY CS :0000