Vaddio WallVIEW CCU Z330 - Manual (Page 7)

WallVIEW CCU Z330
WallVIEW CCU Z330 Installation and User Guide 341-906 Rev. A Page 7 of 12
General Specifications
WallVIEW CCU Z330
Part Numbers WallVIEW CCU Z330 999-6857-000 (NTSC)
WallVIEW CCU Z330 999-6857-001 (PAL)
•
Sony BRC-Z330
Image Device 1/3-type CMOS
Total Picture Elements 2 Megapixels (approximate)
Signal System 1080/59.94i, 1080/50i, 720/59.94p or 720/50p (switchable) with SD output
Lens 18x Optical Zoom (72x with digital zoom)
Focal Length f=4.6 to 82.8mm
Minimum Illumination 6 lux (50 IRE, f1.6, +24 dB)
Horizontal Viewing Angle 3.3 to 55.1 degrees
Video S/N Ratio 50 dB
Pan/Tilt Angle -175 to +175 degrees (Pan), -30 to +90 degrees (Tilt)
Image Device ¼-type CMOS x 3
Total Picture Elements 1.12 Megapixels x 3
Signal System 1080/59.94i or 1080/50i (switchable)
Lens 20x Optical Zoom (80x with digital zoom)
Focal Length f=3.9 to 78mm
Horizontal Viewing Angle 1.8 to 55.2 degrees
Video S/N Ratio 50 dB
Pan/Tilt Angle -170 to +170 degrees (Pan), -30 to +90 degrees (Tilt)
•
Quick-Connect CCU Interface (QCCU)
Connectors Power Connector: 5.5mm OD x 2.5mm ID
Power RJ-45: Supplies 36V to EZCamera Interface Module Regulator
Control In RJ-45: Accepts RS-232 from ProductionVIEW or other non-daisy-chain control systems
Control Out RJ-45: Passes RS-232 and Sync video feed to camera EZIM
Tally: 2-Pin Phoenix type spring cage connector
Video Inputs: BNC Connector for Sync
Video Outputs: BNC Connectors for HD Analog Component (Y,PB,PR) / SD (Composite)
Video RJ-45: Transports HD video from camera EZIM
Camera Select Switch For Future Use – All switches should be in the down position
Video Adjustments Y-Gain (luminance gain) for fine tuning over longer cable distances
Distance Compensation: 100’, 200’, 300’, 400’+
CAT-5 Cable Distance Up to 500’ (152.4m)
Power Supply 36 VDC, 2.78 Amp
Dimensions 1-RU Rack Mount - 1.75” H x 19” W x 6” D (4.45 cm x 4.26 cm x 15.24 cm)
•
EZCamera Interface Module CCU (EZIM)
Connectors Three (3) RJ-45 Connectors
One DB-25 for Power, Video, Control & Genlock
Cable Assembly For Sony Z330 Camera: DB-25M to DB-15HD, 8-Pin Mini Din, BNC x 2, EIAJ4 Power Connector
Power Regulator Supplies 12VDC to Cameras
Dimensions 3” H x 4.5” W x 1.2” D (7.6 cm x 11.4 cm x 3 cm)
•
Thin Profile Wall Mount Z330
Materials 12-Gauge CRS with Black Powder Coat Paint
Dimensions 8” H x 8.5” W x 11.875” D (20.3 cm x 21.6 cm x 30.2 cm)
Weight Approx. 4.5 lbs. (2 kg)