Mode condition, Basic settings, 14 basic functions – Vaddio Sony EVI-HD1 PTZ Camera User Manual
Page 14
14
Basic Functions
Mode Condition
Basic settings
Mode
Power On
Power Off
1)
IFC
2)
Initializing
3)
During displaying
Other Status
Memory Command
Command
the menu
Address Set
aa
aaaa
IF_Clear
aa
aaaa
CAM_Power On
a
××
aa
×
CAM_Power Off
a
××
aa
×
IR_Receive On/Off
ЧЧ
Ч
a
4)
a
×
IR_ReceiveReturn On/Off
ЧЧ
Ч
aa
×
CAM Version Inq
aa
aaaa
CAM_Power Inq.
aa
aaaa
BlockInquiry
ЧЧ
Ч
aa
×
InquiryCommand (and similar commands)
ЧЧ
Ч
aa
×
1)
DC power is being supplied, but the camera has been turned off by a VISCA command.
2)
The period from the time IF Clear is sent, until the Reply Packet is returned.
3)
The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the camera subsequently fi
nishes the pan/tilt reset operation
and stops at the Home position, until the video signal is output. Or the period from the time the CAM Power ON command is sent,
until Completion is returned.
4)
The camera does not receive the operation sent from the Remote Commander.