Vaddio Sony EVI-HD1 PTZ Camera - Manual (Page 4)

4
Connection
Connection
1) When the camera is connected to a computer with a VISCA cable (cross type, RS-232C), you can operate
the camera with the computer. To obtain a cable, consult the dealer where you bought your camera.
2) To VISCA IN of other EVI-HD1s (when connecting to more than one camera)
3) The HD OUT COMPONENT output is not compatible with a computer display that does not support HDTV
formats.
Video cable
(not supplied)
to Video
input to SD OUT VIDEO
S-Video cable
(not supplied)
to S-Video
input
VISCA cable
(not supplied)
1)
to RS-232C
AC power adaptor
(supplied)
to DC IN 12V
to AC outlet
Power cord (supplied)
to VISCA IN
to VISCA OUT
Computer, video
monitor, HD video
monitor, VTR, or
HD CAM VTR with a
video input jack
to HD OUT
COMPONEN
T
Notes
• You cannot connect your Color Video Camera to a
computer that is not equipped with either video input or an
S-Video input connector.
• Use only the AC power adaptor (JEITA type4) supplied
with the unit. Do not use any other AC power adaptor.
Polarity of the plug
• You have to set the video format of the signal to be output
from the camera. For detailed information on how to set
the video format, see “5 SYSTEM SELECT switch” on
page 5.
2)
to SD OUT
S VIDEO
to component
video input
3)
Connecting cable with
D-sub 15-pin connectors
(not supplied)
Connecting cable
with BNC connectors
(not supplied)
to HD-SDI
Input to HD OUT HD-SDI