Vaddio Sony EVI-D70 PTZ Camera - Manual (Page 25)

25
Basic Functions
Initial Settings, Position Preset
Mode/Position Initial settings
Position Position
preset 1 preset 2 to 6
Pan/Tilt Position Home position a a
Pan/Tilt Limit Position movable-range maximum a
×
Zoom Position Wide end a a
D-Zoom On/Off On a a
D-Zoom Separate/Combine Combine a
×
D-Zoom Position 00h a a
Focus Position — a a
Focus Auto/Manual Auto a a
Near Limit Setting 8000h (29 cm) a a
AF Sensitivity Normal a
×
AF Mode Normal a
×
AF Run Time 5 sec a
×
AF Interval 5 sec a ×
WB Mode Auto a a
WB Data (Rgain, Bgain) — a a
One Push WB Data — a
×
AE Mode Full Auto a a
Slow Shutter Mode Manual a a
Shutter Position 1/60sec (NTSC), 1/50sec (PAL) a a
Iris Position — a a
Gain Position — a a
Bright Position — a a
Exposure Compensation On/Off Off a a
Exposure Compensation Amount ±0 a a
Backlight On/Off Off a a
Spot AE On/Off Off a ×
Spot AE Position Setting X=8, Y=8 a
×
Aperture Level 5 a a
IR_Receive On/Off On a
×
IR_ReceiveReturn On/Off Off a
×
Auto Power Off Timer 0 a
×
Night Power Off Timer 0 a
×
LR Reverse On/Off Off a ×
Freeze On/Off Off
Ч Ч
Picture Effect Off a ×
ICR On/Off Off a a
Auto ICR On/Off Off a
×
Preset Memory Same as the initial value setting a a
Display On/Off Off a a
Mute On/Off Off
Ч Ч
Title Display On/Off Off a
×
The initial values are those set at the factory. Settings
for items in Position presets 1 to 6 that will be retained
even when the power to the camera is turned off are
indicated by a “O,” those that will be lost are indicated
by an “X.”
• When the power is turned on, the settings retained in
POSITION 1 will be called up as the initial settings.
• When a CAM_Memory Reset command is sent, or a
choice is made from POSITION 1 to 6 while the
RESET button on the remote control is being pressed,
the settings selected will be used as the initial
settings.
• Position preset 1 becomes VISCA command
CAM_Memory memory number 0. Position presets 2
through 6 become VISCA command CAM_Memory
memory numbers 1 through 5.
(Continued)