Akai MPX16 - Manual (Page 11)

11
Parameter
Family Parameter Description Range/Options
Filter/MIDI A: Cutoff (Cut) The cutoff setting of the 4-pole low-
pass filter. 000 – 100
B: Resonance (Res) The resonance setting of the 4-pole
low-pass filter. 000 – 100
C: Envelope>Filter (E>F) How much the filter envelope affects
the current pad's filter cutoff. (When
set to 100, the envelope level will be
added to the cutoff value.) 000 – 100
D: MIDI Note (MID) The MIDI note sent and received by
the pad. 000 – 127
Utility A: Trigger Mode (Trg) How the pad will play its sample when
pressed, which also affects the filter
and amplitude envelopes:
One-Shot: When you press the pad,
the entire sample will play.
Loop: When you press and hold the
pad, the sample will loop until you
release it.
Hold: When you press the pad, the
sample will loop until you press the
pad again. One Shot (1Sh),
Loop (Lp),
Hold (Hld)
B: Choke Group (C.G) The pad's choke group. When you
press a pad in a choke group, all
samples assigned to other pads in that
choke group will stop playing. 01 – 16
C: Mono/Poly (M/P) How the pad plays a second instance
of its sample if you press it again
before its sample finishes playing.
Mono: Pressing the pad before its
sample is finished will cause the
sample to restart.
Poly: Pressing the pad before the
sample is finished will trigger a second
instance of the sample. Mono (Mon),
Poly (Pol)
D: Velocity (Vel) How the pad will respond to velocity
(how hard you press it).
On: The force with which you hit the
pad affects its playback volume.
Off: Pressing the pad will play the
sample at full volume. On,
Off