AZEK Pavers - Manual (Page 5)

Page 5
Installation Instructions - All Applications
Choose Pattern:
AZEK Pavers can be installed in a multitude of different patterns and
combinations. Designs can include small and large repeating patterns.
Some example patterns are provided below:
At least one paver must connect two grids in each direction. The
herringbone pattern does this without needing to specially orientate
the grids.
IMPORTANT:
At least one
paver must
connect two
grids in each
direction.
Here is how the grids must be orientated
to assure overlap in all directions for other
patterns:
Herringbone:
This is the most popular and easiest to install
pattern. Pavers will interlock grids in both
directions.
• Lay the installation grids as illustrated at left.
• Start laying pavers at the starting corner.
Basketweave:
This is the simplest installation method for a
Basketweave pattern, but it will require extra
installation grids. (Visit http://www.azek.com/
idea-starters/pavers-patterns.aspx to learn how
to install without extra grids)
• The starting paver must be laid 4" down and
4" over from the top left corner of the grid.
This will shift the pattern over and assure at
least one paver will connect two grids in both
directions.
• The leftover grid can either be trimmed off, or
a 4" border can used to fill in the extra space.
Running Bond:
This pattern will require the staggering of grids
to assure the pavers will connect them in both
directions.
• The starting paver can be laid in the top left
corner, but the next column of grids must be
staggered halfway down the starting row.
Every other column will need one half grid at
the top.
• Each half of the cut grid can be used.