AASTRA DT690 - Manual (Page 128)

C ORDLESS P HONE FOR MX-ONE™
128 1424-EN/LZT103 088 Uen F5 2012-03-14
Using the desk PDM charger for software download and synchronization
of parameters is most often done by system administrators, and requires
that the charger is connected either to the LAN and CPDM3 or to a PC
with the WinPDM software application installed. For a short description
of CPDM3 and WinPDM, see 22.5 WinPDM and CPDM3 on page 132.
The desk PDM charger is connected to a PC through the USB or one of
the network connectors, see figure 20 on page 128. When you connect
the charger with a PC through one of the network connectors, the
charger acts as a switch, making it possible to connect the other
connector to the LAN.
Figure 20:Network and USB Connectors
Note: Network and USB connectors are used to connect the desk PDM
chargers to a PC running the WinPDM or to the LAN (not for
charging).
22.3.3 Rack PDM Charger
The rack PDM charger is used for charging several phones, as well as
for software download, and synchronization of parameters. The built in
power supply can charge up to six cordless phones at once.
22.3.4 Battery Pack Rack Charger
The battery pack rack charger is used for charging up to six spare
batteries.