AASTRA DT690 - Manual (Page 63)

1424-EN/LZT103 088 Uen F5 2012-03-14 63
S HORTCUTS
4. Select Function and press Select.
5. Select a function from the list, and press Select.
6. Press Back to confirm, or enter any required information, such as
a phone number, and press OK to confirm.
Note: Depending on which function you select, you may need to
enter more information or make more selections. If, for example,
you select Phone call or Send message, you will be prompted
for the phone number of whom to call or send a message to.
7. Select Value (if available for the selected function), press Select
enter a value and press OK.
8. Select Control question and press Select.
9. Select Off or On, and press Select and then Back.
Note: The control question value is Off by default. If you select
On, a control question Proceed? is displayed when you press
and hold the navigation key.
10. Press Save.
The message Changes saved is displayed.
10.4 Multifunction Button
The multifunction button can be defined with two different functions. A
long press activates one function, and a double press activates another
function. The key is not used by default, but can be defined by the user
of the phone.
To assign functions to the multifunction button, do the following:
1. Press Menu, select , and press Select.
2. Select Multifunction button, and press Select.
3. Select Long press or Multi press, and press Select.
• Long press means that you press and hold the multifunction
button to reach the assigned function.
• Multi press means that you press twice quickly on the multi-
function button to reach the assigned function.
4. Select Function and press Select.
5. Select a function from the list, and press Select.
6. Press Back to confirm, or enter any required information, such as
a phone number, and press OK to confirm.