AASTRA DT690 - Manual (Page 68)

C ORDLESS P HONE FOR MX-ONE™
68 1424-EN/LZT103 088 Uen F5 2012-03-14
Note: If New call does not appear when you press More, it is
possible to press R and dial the third party to initiate the inquiry.
3. Dial the third party's phone number and press .
OR
Press the soft key, select a contact, press Select, and then
press Call.
Note: It is only possible to select a contact from the local and
company phonebook, but not from the central phonebook, when
making an inquiry.
4. When the third party answers, it is possible to switch between the
calls (refer back), transfer the call, create a conference, and end
one of the calls.
12.5.1 Ending Inquiry Call
When yo want to end the inquiry call, do the following:
1. Press More during the call.
2. Select End call and press Select.
The third party is disconnected, and you are connected to the first
party.
Note: If End call does not appear when you press More, press
R to return to the first party.
12.5.2 Refer Back
When you have made an inquiry to another party, and want to switch
between the calls, do the following:
1. Press More, select Switch and press Select.
Note: If Switch does not appear when you press More, press 2
to refer back. Sweden, press R.
12.6 Transfer
If you wish to transfer an ongoing call to another extension, you can use
the transfer feature.
Note: This feature needs to be configured in the WinPDM or CPDM3.
Please contact the system administrator.