Beijer Electronics MT 230 Nautic Monitor EN - Manual (Page 39)

Interfaces and Functions
Beijer Electronics, MAEN956 39
9.10 Digital OUT
Target Application
The outputs are used to make e.g. external acoustic or visual (alarm) signals.
Function
The contacts “Digital OUT 1” and “Digital OUT 2” are activated by the con-
troller. They can be linked with the inputs “Digital IN”, or their conditions can
be set over the serial or LAN interface. “Digital OUT1” is coupled directly with
the buzzer on the front plate.
Plug
4-pin Phoenix plug with “screw safety lock” RM3,81 for lines to 1.5 mm².
Connection
Connection Data
Relay contact 24 V DC/1A or 230 V AC/0.1 A.
Pin Function Description
1 Digital OUT 1 Normally open contact 1
2 Digital OUT 1 Normally open contact 1
3 Digital OUT 2 Normally open contact 2
4 Digital OUT 2 Normally open contact 2