Beijer Electronics iX Panel T60 EN - Manual (Page 25)

Hardware Replacement
7.6 Replacing the Battery
The following is needed:
• A new battery, see Available Spare Parts for iX Panel T60
Note:
Make sure to use adequate ESD protection.
Note:
Make sure to make a backup copy of the operator panel project.
Follow the steps below to replace the battery:
1. Power off the operator panel.
2. Open the battery cover.
3. Use a non-conductive pair of pliers to extract the battery.
Battery
4. Insert the new battery.
5. Re-assemble the battery cover.
Note:
The removed lithium battery should be recycled.
Beijer Electronics, MAEN005 25