Adaptec SANBLOC S50 - Manual (Page 11)

9 SANBloc S50 Quick Install Guide
2 To expand your configuration with multiple SANbloc S50 enclosures,
continue to connect the EXP port of the previous enclosure to the
HOST port of the next enclosure.
You can connect up to seven SANbloc S50 enclosures to a single Snap
Server.
3 Continue with “Powering On”.
Powering On
Before you begin, ensure that your Snap Server is powered off.
1 Use the included power cords to connect each APC unit on each
SANbloc S50 to an AC power source. Adaptec recommends that you
use an uninterruptible power supply (UPS) to protect your enclosure,
and that each APC unit be connected to a different UPS on a different
building circuit.
2 Power on all SANbloc S50 enclosures.
HOST EXP
FAULT ! SEP MASTER
HOST EXP
FAULT ! SEP MASTER
HOST EXP
FAULT ! SEP MASTER
SANbloc S50 Enclosures
Snap Server
SAS Port
EXP Port HOST Port