Airlink101 AICN747 - Manual (Page 21)

- 20 -
Item Features
The following describes the function of each item on the main screen:
„ CONTROLS Panel
- SETTING: Click to enter the Setting screen of SkyIPCam View. Click again to return to the main
screen of SkyIPCam View.
- PLAY: Click to play the recorded video file using the media player on the computer (for example,
Windows Media Player by default).
- LOCK: Click to lock the camera controls. Click again to resume controls for the camera. If you have
set ID and Password in SETTING > Account, you will be asked to enter the required information to
unlock.
- ALL RECORD: Click to start recording video clips using all connected cameras. Click again to stop
recording and save the files in the computer. When you connect only one camera, this button’s
function is the same as the RECORD button.
TIP By default, the ID and Password boxes are “blank.” Click SETTING > Account to change the ID
and password of Lock/Unlock function.
VIEW SELECTION Panel
- View mode buttons: SkyIPCam View provides multiple view modes, including 1/4/9/16 windows
and Full screen mode.
- SCAN: When you connect multiple cameras, click this button to display the video views as the main
window in turn.
- PREV: When you connect multiple cameras, click this button to switch the video view to the
previous camera.
- NEXT: When you connect multiple cameras, click this button to switch the video view to the next
camera.
TIP To set the time interval of scanning, click SETTING > Other and then adjust the time from 1 to 10
seconds in the Time interval of scan option.