Airlink101 AICN747 - Manual (Page 35)

- 34 -
4.3 Network Settings
The Network menu contains three sub-menus that provide the network settings for the camera, such as
the IP Setting, DDNS Setting, and IP Filter.
Network >> Network
„ IP Setting
This item allows you to select the IP address mode and set up the related configuration.
- DHCP: Select this option when your network uses the DHCP server. When the camera starts up, it
will be assigned an IP address from the DHCP server automatically. It is recommended that you
NOT use DCHP. You should instead use Static IP mode to set a static IP so that the IP address
will never change and you will always know what it is.
- Static IP: Select this option to assign the IP address for the camera directly. You can use
SkyIPCam Utility to obtain the related setting values.
IP Enter the IP address of the camera. The
default setting is
192.168.1.240 .
Subnet Mask Enter the Subnet Mask of the camera. The
default setting is
255.255.255.0 .
Default Gateway Enter the Default Gateway of the camera.
The default setting is
192.168.1.1 .