Airlink101 AICN747 - Manual (Page 48)

- 47 -
Event Configuration >> Schedule Trigger
You can separately configure the schedule for trigger function of the camera by Email, or FTP. Select the
Enable option on each item, and then select a Schedule Profile from the pull-down list and set the
Interval time.
Event Configuration >> GPIO Trigger
Select the Enable option to enable the GPIO trigger function of the camera, so that you can set Trigger Out
function or send captured images within the detecting area to the FTP server or email receiver. You have to
configure corresponding settings, such as FTP server and email server, to enable this feature.
- Schedule Profile: Select a schedule profile from the pull-down list.