Airlink101 AICN747 - Manual (Page 7)

- 6 -
C
HAPTER
2
H
ARDWARE
I
NSTALLATION
2.1 Installing the Wall Mount Kit
The camera comes with a Wall Mount Kit, which allows you to place your camera anywhere by mounting the
camera through the three screw holes located in the base of the Wall Mount Kit.
2.2 Connecting the Camera to LAN
Use the provided Ethernet cable to connect the camera to your local area network (LAN).
When you connect the AC power adapter, the camera is powered on automatically. You can verify the power
status from the Power LED on the front panel of the camera.
Once connected, the Link LED starts flashing green light and the camera is on standby and ready for use now.
Wall Mount Kit
Screw
Screw
Screw