Meteor ProMover 250 - Manual (Page 3)

3
- During the initial start-up some smoke or smell may arise. This is a normal process and
does not necessarily mean that the device is defective.
Caution: During the operation, the housing becomes very hot.
Do not switch the device On and Off in short intervals as this would reduce the lamp's life.
- Keep away from children and non-qualified users.
OPERATING DETERMINATIONS
-
This device is a lighting effect for creating decorative entertainment lighting effects.
- This product is only allowed to be operated with an alternating voltage of 120 V,60 Hz and
was designed for indoor use only.
- This device is designed for professional use on stages, in discotheques, theatres etc.
- Lighting effects are not designed for permanent operation.
- Consistent operation breaks will ensure that the device will serve you for a long time
without defects.
- Do not shake the device. Avoid brute force when installing or operating the device.
- When choosing the installation-spot, please make sure that the device is not exposed to
extreme heat, moisture or dust.
- There should not be any cables lying around. You endanger your own and the safety of
others!
- The symbol - - -“m” determines the minimum distance from lighted objects.
- The minimum distance between light-output and the illuminated surface must be more than
0.5 meters.
- This device is only allowed for suspended installation via the mounting bracket. In order to
safeguard sufficient ventilation, leave 50 cm of free space around the device.
- Make sure that the area below the installation place is blocked off when rigging, derigging
or servicing the fixture.
- Always secure the fixture with an appropriate safety-rope and proper rigging hardware
designed to hold more than 10 times the weight of the fixture (proper industry standard).
- Never look directly into the light source, as sensitive persons may suffer an epileptic shock
- The maximum ambient temperature t = 45° C must never be exceeded.
- Operate the device only after having become familiar with its functions.
- Do not permit operation by persons not qualified for operating the device. Most damages
are the result of unprofessional operation!
- Please use the original packaging if the device is to be transported.
- Please consider that unauthorized modifications on the device are forbidden due to safety
reasons and will void any warranty
- Never remove the serial barcode from the device, as this would make the warranty void.
- If this device will be operated in any way different to the one described in this manual, the
product may suffer damages and the warranty becomes void. Furthermore, any other
operation may lead to dangers like short-circuit, burns, electric shock and lamp explosion,
- Lamps and fuse replacements are not covered under warranty.