Minka Group F853-WH User Manual
Page 13
Black(hot)
Green or bare copper
(ground)
Black ("ac in l")
Ground(green) (connect
toground wire on hanger
bracke if no house ground
wire exists.)
White (neutral)
White ("ac in n")
Fig.11
Step 2. If your outlet box has a GROUND wire (Green or Bare Copper) connect this wire to the Hanger
Ball and Hanger Bracket Ground wires. If your outlet box does not have a Ground Wire, then connect
the Hanger Ball and Hanger Bracket Ground Wires together. Secure wire connection with the plastic
wire nut provided. (Fig. 11)
After all splices are made, check to make sure there are no loose strands. As an additional precaution
we suggest to secure the plastic wire connectors to the wires with electrical tape.
NOTICE: This device complies with Part 15 of FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications not expressly approved by the party responsible for compliance
could viod the user’s authority to operate the equipment.