Minka Group F853-WH - Manual (Page 21)

SYMPTOM
Fan Wobble
SOLUTION
1.NOTE: All blade sets are grouped by
weight. Because wood and plastic
blades vary in density, the fan may
wobble even though blades are matched.
2.Make sure outlet box is secured to
building structure, if necessary use
the wood screws provided to further
secure outlet box to joist.
3.Make sure hanger bracket is secure to
the outlet box, screws are tight.
SYMPTOM
Fan will not start
SOLUTION
SYMPTOM
Fan sound noisy
SOLUTION
1. Allow a 24-hour "break in" period. Most
noises associated with a new fan will go
away during this time.
2. Make sure all blade attachment screws
are tight.
3. Make sure outlet box is secured to
building structure, if necessary use the
wood screws provided to further secure
outlet box to joist.
4. Make sure hanger bracket is secure to
the outlet box, screws are tight.
TROUBLESHOOTING
11
1.Check to make sure the wall switch is turned on.
2.Check circuit fuses or breakers.
3.Cantion! Make sure the power is turned
off before performing the following steps.
4.Remove canopy and check wire connections.
5.Check wall control transmitter connections
(if applicable).
6.Note: Fan must be installed from a maximum
distance of 40 feet from the transmitting unit
for proper signal transmission between the
transmitting unit and the fan's receiving unit.