Minka Group F853-WH - Manual (Page 14)

Step 1. Remove 1 of the 2 screws from the bottom of
the hanger bracket and loosen the other one half a turn
from the screw head. (Fig. 12)
Step 2. Slide the canopy up towards the hanger bracket
and place the key hole on the canopy over the screw on
the hanger bracket, turn canopy until it locks in place at
the narrow section of the key holes. (Fig. 13)
Step 3. Align the circular hole on canopy with the remaining
hole on the hanger bracket, secure by tightening the two
set screws. (Fig. 14)
Step 4. Twist the canopy hole cap to fit it on canopy.
FINISHING THE INSTALLATION
Fig.12 Fig.13 Fig.14
6