A&D 191 - Manual (Page 14)

99999
To access the setup menu follow these steps:
1. Unplug the printer either at the outlet or at the back of
the printer.
2. Press and hold down the left side of the rocker switch
and plug in the printer. The printer will advance the
paper. After the paper advance has stopped, count for
3 to 5 seconds and then release the switch. The
following is printed:
If you wait less than three or more than five seconds
R
R R R Ready eady eady eady eady is printed and you will have to try steps 1 and 2
again to access the setup menu.
After you access the setup menu, if you press NEXT NEXT NEXT NEXT NEXT (left
side of switch) repeatedly you will see the following list
printed. If you keep pressing NEXT
NEXT NEXT NEXT NEXT (left side) the list
repeats itself.
As you can see from the above printout the setup menu
contains the following items:
•CONFIGURE CONFIGURE CONFIGURE CONFIGURE CONFIGURE menu
•CUST CUST CUST CUST CUSTOM OM OM OM OM menu
•SET CL SET CL SET CL SET CL SET CLOCK OCK OCK OCK OCK menu
•RESET SEQ# RESET SEQ# RESET SEQ# RESET SEQ# RESET SEQ#
The following pages explain these items and how to
customize the printer to your needs.
The first setup menu item reads:
CONFIGURE [NEXT/OK] CONFIGURE [NEXT/OK] CONFIGURE [NEXT/OK] CONFIGURE [NEXT/OK] CONFIGURE [NEXT/OK]
[NEXT/OK] [NEXT/OK] [NEXT/OK] [NEXT/OK] [NEXT/OK] is a visual clue so you know that pressing the
left side of the rocker switch will go to the NEXT
NEXT NEXT NEXT NEXT part of
the menu and that pressing the right side of the rocker
switch will accept (or say OK
OK OK OK OK to) what this line of the setup
menu says.
Accessing the Setup Accessing the Setup Accessing the Setup Accessing the Setup Accessing the Setup
Menu Menu Menu Menu Menu
CONFIGURE CONFIGURE CONFIGURE CONFIGURE CONFIGURE