A&D 191 - Manual (Page 20)

15 15 15 15 15
The cursor now appears over the 2nd position. Press
NEXT
NEXT NEXT NEXT NEXT (left side) to increment this number if needed and
OK
OK OK OK OK if it is right. Continue this sequence of accepting or
changing the year, month, day, and DOW (Day Of Week).
When you have completed the SET D SET D SET D SET D SET DA A A A ATE TE TE TE TE menu the
following is printed automatically:
Choose NEXT NEXT NEXT NEXT NEXT (left side) to increment the number or OK
(right side) to accept the 1. Repeat this same procedure
for hours and minutes as shown below.
When everything is as you want it and you press OK OK OK OK OK,
ST ST ST ST START CL ART CL ART CL ART CL ART CLOCK OCK OCK OCK OCK is printed. Press OK OK OK OK OK (right side) to start the
clock. The printer then prints R R R R Ready eady eady eady eady showing you that it is
out of the setup menu and ready to print.
RESET SEQ# RESET SEQ# RESET SEQ# RESET SEQ# RESET SEQ# is the last setup menu item. This menu item
lets you reset the sequence number. This number is the
number of print transactions since the last reset.
With the printer in the setup menu and with RESET SEQ#
RESET SEQ# RESET SEQ# RESET SEQ# RESET SEQ#
as the last item printed, if you press OK OK OK OK OK (right side) the
sequence number will be reset to zero and the printer will
print R
R R R Ready eady eady eady eady and printer is ready to print.
To skip resetting the sequence number to zero, press
NEXT
NEXT NEXT NEXT NEXT (left side). CONFIGURE CONFIGURE CONFIGURE CONFIGURE CONFIGURE is printed. Unplug and replug
in the printer to return to printing mode. R R R R Ready eady eady eady eady is printed.
This feature is
available only on
units with the
time/date option
installed.
RESET SEQ# RESET SEQ# RESET SEQ# RESET SEQ# RESET SEQ#
DOW :
0=Sunday
1=Monday
2=Tuesday
3=Wednesday
4=Thursday
5=Friday
6=Saturday