Specifications – A&D 191 User Manual
Page 4
Specifications
Interface
Interface
Interface
Interface
Interface-----Serial
Serial
Serial
Serial
Serial
Character Buffering
Character Buffering
Character Buffering
Character Buffering
Character Buffering
Character Matrix
Character Matrix
Character Matrix
Character Matrix
Character Matrix
Character Spacing
Character Spacing
Character Spacing
Character Spacing
Character Spacing
Line Feed Spacing
Line Feed Spacing
Line Feed Spacing
Line Feed Spacing
Line Feed Spacing
PPPPPrint Speed
rint Speed
rint Speed
rint Speed
rint Speed
PPPPPaper
aper
aper
aper
aper
PPPPPrint Method
rint Method
rint Method
rint Method
rint Method
PPPPPower
ower
ower
ower
ower
AC V
AC V
AC V
AC V
AC Voltage
oltage
oltage
oltage
oltage
DC V
DC V
DC V
DC V
DC Voltage
oltage
oltage
oltage
oltage
External Dimensions
External Dimensions
External Dimensions
External Dimensions
External Dimensions
Operating T
Operating T
Operating T
Operating T
Operating Temp.
emp.
emp.
emp.
emp.
Available baud rates:
300, 600, 1200, 2400, 4800, 9600, 19200
Voltage levels:
RS-232C: -9 Volts to + 9 Volts
Character format:
Standard ASCII character set—10 or 11 bits per
character, 7 or 8 data bits.
Even or odd parity selection for 7 data bits.
Bit mapped graphics—10 bits per character
required
Busy signal - Clear to Send (CTS) or XON-XOFF
1.5K standard
8K optional
Approximately 9500 byte capacity with option installed.
Impact dot matrix
5 x 8 or 5 x 5
24 column:
12.8 characters/inch
32 column:
17 characters/inch
40 column:
21 characters/inch
7.6 lines per inch, character mode
9.1 lines per inch, graphic mode
38 lines per minute for 24 column
33 lines per minute for 32 and 40 column
Table top:
2.25"W x 2.75"D; 0.44" I.D.
Panel mount:
2.25"W x 1.25"D
1 Watts (idle), 10 Watts (while printing)
9 VAC (120 VAC stepdown converter included)
Multi-national converters optional
Optional 9-12 VDC
100mA idle, 1500mA with 100% printing, 2.9A peak with
100% printing
4.1"W x 4.5"L x 2"H
5ºC to 40ºC, 41ºF to 104ºF