Specifications – Australian Monitor AMD200 User Manual
Page 18
Specifi cation
Conditions
Frequency response:
Mic/Line Inputs ----->Line Level Output
20-20 kHz, -3 dB
Signal Input -2 dB below clip
Mic/Line Inputs ----->Amp Output
60-20 kHz, -3 dB
Signal Input -2 dB below clip
Stereo Inputs ---->Line Level Output
20-20 kHz, -3 dB
Signal Input -2 dB below clip
Stereo Inputs ---->Amp Output
60-20 kHz, -3 dB
Signal Input -2 dB below clip
Total Harmonic Distortion:
Mic/Line Inputs ----> Line Level Output
<0.05 %
0 dB gain, Signal input -2 dB below clip
Mic/Line Inputs ----> Line Level Output
<0.1 %
45 dB gain, Signal input -2 dB below clip
Mic/Line Inputs ---> Amp Output
<0.5 %
Signal input -2 dB below clip
Stereo Inputs ---> Line Level Output
<0.05 %
Signal input -2 dB below clip
Stereo Inputs ----> Amp Output
<0.5 %
Signal input -2 dB below clip
Input Impedance:
Mic/Line
Mic:
1.5
k
Line:
1.5
k
Stereo Input
12 k
Max Input
Mic/Line Input
22 dBu
Mic/Line pad on
2 dBu
Mic/Line pad off
Stereo Input
6 dBu
Mic/Line Pad Switch:
20 dB pad
Maximum Voltage Gain:
Mic/Line Inputs
45 dB
With 45 dB gain switch (analog domain)
Phantom Power:
+34 VDC
Available via individual switch on each mic/line channel
Cross Talk:
> 80 dB
1 kHz, input channel at clip, measured on line output of adjacent output
S/N Ratio:
Mic\Line Input
> 92 dB
A-weighted, to line and amp output, 20 Hz to 20 kHz
Stereo Input
> 91 dB
A-weighted, to line and amp output, 20 Hz to 20 kHz
Max Output
Line Level Ouptut
10 dBu
Balanced (+4 dBu unbalanced on each leg)
PAGE 18
AMD100/200 INSTALLATION AND OPERATION MANUAL
SPECIFICATIONS