Australian Monitor AMD200 - Manual (Page 9)

Input Level:
Each input on the AMD100/200 contains a digital trim level control, this ranges
from -96 dB to +12 dB.
There is also an invert button to reverse the phase on that input.
Input Dynamics:
Each input on the AMD100/200 contains a compressor. Threshold, Ratio, Attack,
Release and Output Gain may be adjusted.
All adjustments are displayed on the graph to the right of the screen.
Input EQ:
Each input on the AMD100/200 contains EQ. The EQ features a Low Shelf, High Shelf
and 2 parametric fi lters.
All adjustments are displayed on the graph to the right of the screen.
Output EQ/Filter:
Each output of the AMD100/200 contains an EQ and Crossover. The crossover allows
you to place a High Pass, Low Pass and All Pass fi lter on the signal. Each fi lter has a
frequency adjustment, the All Pass fi lter also contains a Q width adjustment.
From the drop down boxes below the fi lter adjustments you can change the fi lter slope,
the options are:
Butterworth 6 dB/Oct – 24 dB/Oct
Linkwitz-Riley 12 dB/Oct – 24 dB/Oct
Bessel 12 dB/Oct – 24 dB/Oct
The EQ section of the output features a High Shelf, Low Shelf and 4 parametric fi lters.
Both the crossover and the EQ section displayed on the graph to the right of the page.
PAGE 9 AMD100/200 INSTALLATION AND OPERATION MANUAL
USING THE GUI