SawStop CB73480 - Manual (Page 32)

30 SawStop 10” Industrial Cabinet Saw
4. System Status Codes:
In the event that the safety system detects an error, the LEDs on the Switch Box will display a status code to
indicate what error has been detected. Table 1 shows the different status codes which can be displayed. A
complete description of each status code and the necessary corrective action is provided below.
System Status Codes
Green LED Red LED Status
System Initializing
System Ready
Replace the Brake Cartridge
Blade is Coasting Down
Bypass Mode is ON
Switch the Start/Stop Paddle to OFF
Turn the Cartridge Key to ON
Close Belt Access Door and Motor Cover
Adjust Position of the Brake Cartridge
Contact was Detected During Standby
Contact was Detected During Bypass
Overload Due to Wet Wood
WARNING! Always turn the Main Power Switch to OFF and disconnect the saw
from the power supply before performing adjustments or maintenance to the saw.
Green LED blinks fast
Green LED blinks slowly
Green LED is on solid
Red LED blinks fast
Red LED blinks slowly
Red LED is on solid
Table 1
Using Your Saw
Symbol Key:
Cabinet Saw Manual 1st Reprint.i30 30 3/9/2010 8:32:49 AM