Using your saw – SawStop CB73480 User Manual

Page 45

Advertising
background image

SawStop 10” Industrial Cabinet Saw 43

Using

Your Saw

If the Cartridge has been Actuated: If the cartridge is being replaced because it has been actuated, the brake

pawl will be locked onto the blade or dado set. In addition, a heavy-duty spring will be pressing the brake pawl

toward the blade or dado set. As a result, the blade or dado set will be more difficult to remove than usual.

First, remove the cartridge key as described on page 42. Once the key is removed, it is often possible to

remove both the brake cartridge and blade simultaneously by alternately moving the blade and cartridge to the

right to “walk” them off the arbor and pins. By placing the end of a blade wrench between the blade and the side

of the arbor block, you can use the wrench to push the blade a short distance away from the arbor flange. Next,

place the end of the wrench between the brake pawl and the cartridge mounting bracket to move the cartridge

away from the arbor block. Repeat these steps to walk the cartridge and blade off.

If the pressure of the spring makes this too hard, you can release the pressure by rotating the brake positioning

bolt counter-clockwise. This will cause the cartridge mounting bracket to move away from the blade. Once the

pressure of the spring is released, you

should be able to remove both the blade

and the brake cartridge together.

If you continue to have trouble removing

the blade and brake cartridge after

the spring pressure is released, you

can knock the brake off the blade so

that the blade and brake cartridge can

be removed separately. As shown in

Fig. 44, place one end of a stick (e.g., 1”

by 1/2” by 16”) along the side the blade

and against the portion of the brake

pawl that is locked on the blade. Using a

mallet, hit the other end of the stick until

the blade completely clears the brake

pawl.

Using Your Saw

Once the cartridge key is removed, slide the

brake cartridge to the right until it clears both

pins as shown in Fig. 43.

Fig. 44

tap with

mallet here

Fig. 43

Cabinet Saw Manual 1st Reprint.i43 43

3/9/2010 8:32:56 AM

Advertising
This manual is related to the following products: