Muxlab 6G-SDI Extender Over UTP - Manual (Page 12)

© MuxLab Inc. 6G-SDI Extender Over UTP
Page 12
3.3. Physical Installation
1 Channel
6G/3G/HD-SDI
2 Channels 3G-SDI
4 Channels HD-SDI
SOURCE INPUT (Camera, Etc)
Must use 6G/3G/HD 75Ω graded coax cable
In accordance with the SDI Throughput needed.
Optional Sync Out
Important: Always Use SDI A, then B, etc… as first connection
for any SDI transmission speed.
Connection to UTP
Cable Cat5E/Cat6
In order to maintain
the specifications
Connection to UTP
Cable Cat5E/Cat6
In order to maintain
the specifications
Important: The Receiver output the signals in the same order
and speed as the Transmitter.
Optional Sync In
A
DESTINATION OUTPUT (Recorder, Monitor, Ect.)
Must use 6G/3G/HD 75Ω graded coax cable
In accordance with the SDI Throughput needed.
B C D
48VDC Power Input
Recommended Coaxial Cable:
RG-59 (HD-SDI) Belden 1505A
RG-6 (3G/6G-SDI) Belden 1694A