Muxlab 6G-SDI Extender Over UTP - Manual (Page 8)

© MuxLab Inc. 6G-SDI Extender Over UTP
Page 8
Connectivity - Transmitter
Front Side 4x BNC SDI Input Connectors (0.8V pp, 75Ohms)
1x BNC Sync Output Connector
Rear Side 1x RJ-45 Ethercon Connector (Compatible with NE8MC
System)
Top Side Mini USB for firmware updates (and control & status)
Table 2
– Connectivity Transmitter
Connectivity - Receiver
Front Side Mini USB for firmware updates (and control & status)
Rear Side 1x RJ-45/UTP Connector
4x BNC SDI Output Connectors (0.8V pp, 75Ohms)
1x BNC Sync Input Connector
1x Power Connector (5.5mm x 2.1mm)
Table 3
– Connectivity Receiver