ArtDio IPF-2000L - Manual (Page 18)

IPF-2002L User Manual
18
address of the IPF-2002L in this field.
router ip
With Static selected in iptype drop down list, please enter the router IP
address of the IPF-2002L in this field.
dns
With Static selected in iptype drop down list, please enter the IP address of
the DNS server in this field.
dns2
With Static selected in iptype drop down list, please enter the IP address of
the backup DNS server in this field.
6.2 Protocol Settings:
Protocol Parameter Values
Field Description
protocol
The IPF-2002L supports H.323, SIP and MGCP protocols.
• If you are using a H.323 firmware, this field will be H.323.
• If you are using a SIP firmware, this field will be SIP.
• If you are using a MGCP firmware, this field will be MGCP.
use service
Check this box if you will register to the server. Services response to
different protocols as follows:
• For the SIP protocol: Check this box if you will register to the server.
Then, fill in the SIP proxy server IP address or domain name in the
service addr field.
• For the H.323 protocol: Enter the Gatekeeper IP address.
ƒ To allow the IPF-2002L calls each other by E.164 number:
Please check this option and then fill the IP address or domain
name of corresponding gatekeeper into the Service Addr. field.
ƒ
To make point to point calls to another voice gateway: Please do
not check this option and fill up the voice gateway’s IP address
in the Service Addr. field.
ƒ To make calls by dialing IP address of other IP Phone or H.323
devices (such as Netmeeting) at the same network segment, do
not check this option and leave the Service Addr. field blank.
※ If the gatekeeper is not to be used, please configure the Service
Port as 1720. Detailed information please refers to the Service Port
configuration.
• With MGCP protocol used, the protocol service refers to Call Agent.
Please check this box according to system, and then fill Service
Address field with the IP address or domain name of the Call Agent.