ArtDio IPF-2000L - Manual (Page 5)

IPF-2002L User Manual
5
1. Product Specification
Voice Interface
Call control protocol
SIP(RFC-3261) or H.323 V4 or MGCP
Voice compression G.711 A/µ -Law, G.723.1, G.729A/B/AB
Echo cancellation G.165/G.167 16ms
Voice Process Differential input/Differential output
Delayed (End to End) < 100ms
Flow of the average 14K(G.723.1) ~ 51K(G.729) BPS
Other Support
Silence Suppression, VAD, CNG, Acoustic Echo
Cancellation, Jitter Buffering, DTMF tone detection,
E.164 Dial plan
LAN Interface
Interfaces
Two 10/100 Base-T Auto-Negotiation, MDI/MDI-X
Ethernet Port
Connectors RJ-45 connector
Management Web browser, Keypad on the Phone, LCD screen,
IP address PPPoE, DHCP client, Static IP
Firmware Upgrade FTP/TFTP
Transport Protocol RTP/RTCP, UDP/TCP
General Information
100 ~ 240VAC, 50 ~ 60Hz
Power
5VDC, 1A
Power consumption
5W
Operation Temperature : 0 ~ 40℃ (32° ~ 104°F)
Storage Temperature : -30 ~ 65℃ (-22° ~ 149°F)
Working environment
Relative Humidity : 10 ~ 95% Non Condensing
Certification CE, FCC
Feature Keys
Called, Answered, Miss Call, Phone (Phone book/This
Phone Number), Network-Setting (IP/Subnet Mask/
Gateway/Server IP) Speedy Dial, Call Hold, Redial, Mute,
Volume Up/Down, Hand-free.
100 Entries Phone Book
IVR (English)
Earphone/Microphone Connector
NAT Pass-through (SIP with STUN)
Other information
Call Hold, Call Mute, Call Status, Caller ID, Headset,
Networking Status, Volume Adjustment, No Answer Call
Forward, Busy Call Forward, Always Call Forward, Miss
Call, Dialed Call, Answered Call, Last Number Redial,
Speedy Dial, Web configuration, LCD Display, LED
indicators...etc.