ArtDio IPF-2000L - Manual (Page 27)

IPF-2002L User Manual
27
8. Registration Message
Once the account is successfully registered on the IPF-2002L,【Ready for call】will shows on the
screen, so does the time and date. If the registration is not successful, the LCD will display
【Logon Fail】or【Wait Logon …】. The possible reasons of the registration failure would be:
• Internet connection is fail. (Fail to acquire the IP address under the DHCP and PPPoE
mode, or some IP configurations are wrong under the Static IP mode),
• Registration is fail. (Fail to register to the VoIP server)
9. Using IPF-2002L
9.1 Pickup the Phone
When there is an incoming phone call, the IPF-2002L will ring. There are three ways you can
pick up the call:
• Use
handset:
When the phone rings, pick up the handset to talk to the other end. When the call is end,
hand up the handset.
• From handset to speaker:
If you are using the handset, press ENTER to transfer the call to speaker. Press Enter
again to hand up the call.
• Use
earphone:
Have your earphone plug into the earphone jack. When the phone rings, pick up the
handset and place it aside the phone, then you can use the earphone to pick the phone.
• Use
speaker:
When the phone rings, press ENTER button to pick up the call. Press Enter again to
hand up the call.
• From speaker to handset:
If you are using the speaker, pick up the handset then you are able to pick up the call.
Press Enter again to hand up the call.
9.2 Making Phone Calls
• Use
handset:
Pickup the phone, after hearing the ring tone, you can dial the number. Enter # right after
the number. Once you hear the “Du Du” tone from the phone, the phone on another side
is ringing.
• Use
earphone:
Have your earphone plug into the earphone jack. Pick up the handset and place it aside
the phone, then you can use the earphone to pick the phone.