American Audio Q-2422/SX - Manual (Page 10)

©
American Audio
®
- www.AmericanAudio.com - Q-2422/SX User Instructions page 10
19. MICROPHONE EQ SECTION -
MIC BASS CONTROL - This knob is used to adjust the low frequency output of both MIC 1
(15) and MIC 2 (38). Turning the knob in clockwise direction will increase the low
frequencies, turning the knob in a counter-clockwise direction will decrease the low
frequencies.
MIC MID CONTROL - This knob is used to adjust the mid range frequency output of both
MIC 1 (15) and MIC 2 (38). Turning the knob in clockwise direction will increase the mid
range frequencies, turning the knob in a counter-clockwise direction will decrease the mid
range frequencies.
MIC TREBLE CONTROL - This knob is used to adjust the high frequency output of both MIC
1 (15) and MIC 2 (38). Turning the knob in clockwise direction will increase the high range
frequencies, turning the knob in a counter-clockwise direction will decrease the high range
frequencies.
20. SPLIT CUE -
This button will activate the "Split Cue"
function. When used with a set of stereo head phones, the
Split Cue function assign the Cue signal the left channel of the headphones and assigns the Program
(main output) signal to the right channel of the headphones. Essentially splitting the cue signal in half.
Please note that this function will only work with a set of stereo headphones.
21. MASTER LEVEL BALANCE CONTROL -
This knob controls the balance level output of the
MASTER VOLUME FADER (13). The knob has
center lock position for precise center panning. Turning the knob to the "L" (counter-clockwise) posi-
tion will increase the left channel output level. Turing the knob to "R" (clockwise) position will increase
the right channel output level, while decreasing the left. To maintain a true stereo sound, level the
balance control knob set to the 12 O'clock, or center position.
22. PAN CONTROL -
The balance control for each channel, or how much left and right signal is sent to the left and right
MASTER OUT JACKS (31).
23. ZONE LEVEL VOLUME OUTPUT CONTROL -
This rotary knob is used to control the zone level volume. The zone level is not PFL, it is essentially a
second master output volume with separate output volume control.
24. ZONE LEVEL EQ SECTION -
TREBLE CONTROL -This knob is used adjust the high frequency output of the ZONE
LEVEL VOLUME OUTPUT (23). Turning the knob in clockwise direction will increase the high
frequency output, turning the knob in a counter-clockwise direction will decrease the high
frequency output.
BASS CONTROL - This knob is used adjust the low frequency output of the ZONE LEVEL
VOLUME OUTPUT (23). Turning the knob in clockwise direction will increase the low
frequency output, turning the knob in a counter-clockwise direction will decrease the low
frequency output.
FRONT PANEL - CONTROLS AND FUNCTIONS CONT.