Acnodes MPC 6171B - Manual (Page 24)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
To set the date, highlight the "Date" field and use the PageUp/ PageDown or +/- keys to set the current
time.
Time
The time format is:
Hour : 00 to 23
Minute : 00 to 59
Second : 00 to 59
To set the time, highlight the "Time" field and use the <PgUp>/
<PgDn> or +/- keys to set the current time.
IDE Channel Master/Slave
The onboard Serial ATA connectors provide Primary and Secondary channels for connecting up to four
Serial ATA hard disks. Each channel can support up to two hard disks; the first is the "Master" and the
second is the "Slave".
Press <Enter> to configure the hard disk. The selections include Auto, Manual, and None. Select
'Manual' to define the drive information manually. You will be asked to enter the following items.
Capacity : Capacity/size of the hard disk drive
Cylinder : Number of cylinders
Head : Number of read/write heads Precomp : Write precompensation Landing Zone : Landing zone
Sector : Number of sectors
The Access Mode selections are as follows:
CHS (HD < 528MB)
LBA
(HD > 528MB and supports Logical Block Addressing)
Large (for MS-DOS only)
Auto
Remarks: The main board supports one serial ATA ports and are represented in this setting as IDE Chan-
nel 2.
Video
This field selects the type of video display card installed in your system. You can choose the following
video display cards:
EGA/VGA
For EGA, VGA, SEGA, SVGA or PGA monitor adapters. (default)
CGA 40 Power up in 40 column mode.
CGA 80 Power up in 80 column mode.
MONO For Hercules or MDA adapters.