Acnodes MPC 6171B - Manual (Page 33)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
MPC 6171
17” Medical Grade Panel PC
Core 2 Duo embedded system
User Define Each of the ranges is from 1 min. to 1hr. Except for HDD Power Down which ranges
from 1 min. to 15 min.
Min. Power Saving Minimum power management
Max. Power Saving Maximum power management.
Video Off Method
This field defines the Video Off features. There are three options.
Blank Screen
Writes blanks to the video buffer.
V/H SYNC + Blank Blank the screen and turn off vertical and horizontal scanning.
DPMS
Default setting, allows BIOS to control the video display.
Video Off In Suspend
When enabled, the video is off in suspend mode. The default setting is Yes.
Suspend Type
The default setting for the Suspend Type field is Stop Grant.
Modem Use IRQ
This field sets the IRQ used by the Modem. By default, the setting is 3.
Suspend Mode
When enabled, and after the set time of system inactivity, all devices except the CPU will be shut off. By
default, the setting is Disabled.
HDD Power Down
When enabled, and after the set time of system inactivity, the hard disk drive will be powered down
while all other devices remain active.
Soft-Off by PWR-BTTN
This field defines the power-off mode when using an ATX power supply. The Instant Off mode allows
powering off immediately upon pressing the power button. In the Delay 4 Sec mode, the system powers
off when the power button is pressed for more than four seconds or enters the suspend mode when
pressed for less than 4 seconds.
Wake up by PCI Card
By default, this field is Enabled.