Kramer Electronics VS-88HCB - Manual (Page 19)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VS-88HCB
16
6. Select Use the following IP address, and fill in the details as shown in
Figure 10.
7. Click OK.
Figure 10: Internet Protocol (TCP/IP) Properties Window
6.4.2 Connecting via a Straight-Through Cable
You can connect the ETHERNET of the VS-88HCB to the Ethernet port on a
network hub or network router, via a straight-through cable with RJ-45
connectors.
6.4.3 Configuring the Ethernet Port
After connecting the Ethernet port, you have to install and configure it.
For detailed instructions on how to install and configure your Ethernet port,
see the “ Ethernet Configuration (FC-11) guide.pdf” on our Web site:
http://www.kramerelectronics.com