1 determining the machine number, 2 setting the dip-switches, Determining the machine number – Kramer Electronics VS-88SDI User Manual
Page 15: Setting the dip-switches, Table 3: machine # dip-switch settings
Connecting the VS-88SDI
11
11
6.1.1 Determining the Machine Number
Each unit must be identified by a unique Machine #. Determine the
Machine #
• When using a single unit, set the unit to Machine # 1.
• A master unit must be Machine #1.
When connecting more than one VS-88SDI unit, set a different Machine #
on each unit. The units do not have to be numbered sequentially but each
unit must have a unique machine number.
Table 3: Machine # DIP-Switch Settings
Machine #
DIP-SWITCH
1
2
3
4
1 (Single or
master unit
OFF
ON
)
OFF
OFF
OFF
OFF
OFF
OFF
2
OFF
ON
OFF
OFF
3
ON
ON
OFF
OFF
4
OFF
OFF
ON
OFF
5
ON
OFF
ON
OFF
6
OFF
ON
ON
OFF
7
ON
ON
ON
OFF
8
OFF
OFF
OFF
ON
9
ON
OFF
OFF
ON
10
OFF
ON
OFF
ON
11
ON
ON
OFF
ON
12
OFF
OFF
ON
ON
13
ON
OFF
ON
ON
14
OFF
ON
ON
ON
15
ON
ON
ON
ON
Note: After changing the address, the device must be reset by turning OFF
and ON.
6.1.2 Setting the DIP-Switches
When controlling a unit via the RS-232 or RS-485 ports set the
DIP-switches on the rear of the unit.
DIP-switches
1 A single or master unit can have the address 0 or 1
:
2 The default address is 0 (all DIP-switches are OFF)