Kramer Electronics VS-88SDI - Manual (Page 25)

Technical Specifications
21
21
7.2 Using Serial Commands
To operate the VS-88SDI using serial commands, Kramer offers control
software that can do this. You can download free software from the Kramer
Electronics Web site.
• For an explanation of all KRAMER 3000 commands, see section
11.3
• For an explanation of all KRAMER 2000 commands, see section
12
7.3 Using the Infrared Remote Controller
To operate the VS-88SDI using the RC-IR3 infrared remote controller, see
the User Manual packed with the remote controller.
Note:
• The remote control cannot set single or dual mode operation or
change genlock timing. They can only be set from the front panel
• The IR remote can only set 8 preset configurations equivalent to
OUT1 to OUT8
8 Technical Specifications
The VS-88SDI technical specifications are shown in Table 6 :
Table 6: VS-88SDI Technical Specifications
1
INPUTS: 8 SMPTE-259M, 344
M serial video, 75Ω on BNC connectors
OUTPUTS: 8 equalized and reclocked SMPTE-259M, 344M
outputs 75Ω on BNC connectors
MAX. OUTPUT LEVEL: 800mVpp /
75Ω
DATA RATE: 540Mbps
EQUALIZATION: Automatic equalization for losses on 75
Ω coaxial cable
CONTROLS: Front-panel, RS-232, RS-485, ETHERNET, remote infrared
POWER SOURCE: Universal, 100-240V AC, 50/60Hz 24VA
DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable
WEIGHT: 2.6kg (5.7lbs) approx
ACCESSORIES: Power cord, rack “ears” and IR remote control transmitter
OPTIONS: External remote IR receiver cable
1 Specifications are subject to change without notice