Kramer Electronics RC-8iR - Manual (Page 43)

Creating a Macro
39
Figure 39: Local Area Connection Properties Window
5. Click the Configure… button and select the Advanced tab:
Figure 40: The Advanced Tab
6. Under Property, select “Link Speed & Duplex
1
7. If the connection speed (appearing under Value) is set to Auto Detect, change it
to a manual value of, for example, “100Mb Full Duplex” (or less), as illustrated
in
”.
Figure 41 .
The Network Connection Properties window appears; the available options
depend on the installed network adapter
1 The name may vary depending on the network adapter