Kramer Electronics RC-8iR - Manual (Page 49)

Assigning the Macros to the RC Device
45
12 Assigning the Macros to the RC Device
Once your configuration is ready, you can save it by clicking the save
configuration button in the File menu and then connecting the RC device to the
PC (see section
6 ) and writing the configuration to the device.
12.1 Saving a Configuration
To save a configuration, do the following:
1. Click the ”Read Configuration” button to download the configuration of the
RC device.
2. From the File menu, select Save Configuration….
The Save As window opens (see Figure 48 ).
3. Save the configuration.
Figure 48: Saving a Configuration
12.2 Writing a Configuration to the RC Device
1. Connect the RC device to the PC (see section 6 ):
2. From the File menu, select Load Configuration….
3. Open the RC-1 device configuration file.
4. Click the ”Write Configuration” button.
The configuration is assigned to the RC Device.