Kramer Electronics SP-14 - Manual (Page 31)

31
REMOTE CONTROL WEB SERVER
5.1. Introduction
The unit features a web server which connects to a PC web browser via TCP/IP. The menu system of
the unit is mirrored into the web browser and all menu items can be accessed and controlled through
the keyboard or mouse of the PC.
5.2.
Installing the Software
No extra software needs to be installed on a PC. The PC web browser is used as the graphical user
interface for all control items. To connect to the unit the TCP/IP address has to be entered into the
address list box of the web browser in the following format
http://xxx.xxx.xxx.xxx . The TCP/IP address
assigned to unit can be found in the Information menu.
5.3.
Software Operation
Once the address has been entered into the web browser starts to load pages from the unit mirroring
the menu system of the unit. All menu items are shown as their respective buttons, sliders and list
boxes and can be accessed and altered with the PC mouse or corresponding navigational key presses.
5.4.
Channel Logo Upload
The web browser has an element to upload a channel logo bit map into the file system of the unit which
can be activated and changed in position through the Channel Logo Overlay menu item.