Kramer Electronics SP-14 - Manual (Page 33)

33
ENVIRONMENTAL AND EMC
7.1. Recommended Operating Conditions
Temperature
0oC to 40oC
Humidity (non condensing) 0% to 95%
7.2.
Storage
Temperature
-25oC to +85oC
Humidity (non condensing) 0% to 95%
7.3.
CE and FCC Compliance
CE:
This product complies with the requirements of 89/336/EEC Electromagnetic Compatibility
Directive amended by 92/31/EEC and 93/68/EEC, and 73/23/EEC Low Voltage Directive.
Compliance is to EN55022 Class A.
FCC: WARNING: This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
interference to radio communications. Operation of this equipment in a residential area is likely
to cause interference in which case the user will be required to correct the interference at their
own expense.
The user is cautioned that changes and modifications made to the equipment without approval
of the manufacturer could void the user’s authority to operate this equipment.
It is suggested that the user use only shielded and grounded signal cables to ensure
compliance with FCC rules.