WIKA IPT-11 - Manual (Page 22)

Here, you determine the unit and scaling for PA-Out. These settings
also apply to the values displayed on the indicating and adjustment
module if in the menu item "Displayed value" PA-Out was selected.
7)
In the menu item "PV-Out-Scale", the requested numerical value with
decimal point is entered for 0 % and 100 % of the measured value.
Out-Scale-Unit
PV-Out-Scale
7) The following display values are available in "Out-Scale-Unit": Pressure,
height, mass, flow, volume, others (without unit, %, mA).
Determine Out-Scale
22 Indicating and adjustment module for IPT-1* sensors
5 Set up
31549
-EN
-081211