Connecting display devices – ATI Technologies X800 User Manual
Page 15
Detailed Installation 7
5
Unscrew or unfasten and remove any existing graphics card from
your computer.
6
Locate the appropriate slot and, if necessary, remove the metal back-
plate cover.
7
Align your ATI graphics card with the slot and press it in firmly until
the card is fully seated.
8
Screw in or fasten the graphics card securely. Make sure the cables
are not interfering with anything inside the computer (for example, a
cooling fan).
9
Replace the computer cover.
10
Reconnect any cables you have disconnected and plug in the
computer’s power cord.
11
Before turning your computer on again, connect the appropriate
display devices.
Connecting Display Devices
The following connections are available:
• VGA — for standard VGA monitors.
• DVI-I — for digital flat-panel displays.
You can connect an analog CRT display using an optional DVI-I-to-VGA
adapter, as shown.
L
If your computer has an on-board graphics capability, you may need
to disable it on the motherboard. For more information, see your
computer documentation.