ATI Technologies X800 - Manual (Page 46)

38 MulTView™
To close MulTView™, click the Close button or right-click the
control panel or the video panel, and in the Feature menu, click
Multview , and then click Show.
To change the location of the MulTView™ window
When the main video window is in full screen, right-click the control panel or
the video panel, click
Multview , click Location, and then click the position
you want: Top-Left, Top-Right, Bottom-Right, or Bottom-Left.
You can manually change the embedded window's size and location when the
MulTView™ borders are visible.
Autohiding MulTView™ window controls and borders
The MulTView™ window borders disappear after a few seconds of mouse
inactivity on the MulTView™ window. When you move your mouse over the
MulTView™ window, the border reappears.
Only one video window can be in control. When the embedded MulTView™
window is in focus, its borders are red; when it is not in focus, its borders are
black. For example when the borders are red, a Remote Wonder™ channel-
change command will change the MulTView™ channel.
MulTView™ Audio Requirements
If you have one audio card or an integrated audio chip, you must connect one
audio path internally (CD-In, for example) and the other externally (Line-In,
for example).
If you have two audio cards or one audio card and an integrated audio chip,
you can connect both audio paths internally, externally, or one internally and
the other externally.
EazyLook™
Designed to work with the Remote Wonder™ in full-screen mode,
EazyLook™ displays large, on-screen information about remote control
functions when you watch TV, DVD, or File Player. It also provides
assistance when you use the Library or navigate in TV Listings.