ATI Technologies X800 - Manual (Page 45)

MulTView™ 37
MulTView™
If you have an All-in-Wonder® X800 PCI Express® Series Series card and
an ATI TV Wonder™ PCI card installed in the same system, MulTView™
lets you watch a different channel in a secondary video window. You can
record video from your All-in-Wonder® X800 PCI Express® Series while
you watch another channel on the TV Wonder™. The secondary window can
be in the following locations:
• Picture in Picture (PiP): When the main video window is in full-
screen, the MulTView™ PiP video window is embedded in the main
window. It can be positioned in the top/bottom left or top/bottom
right of the main window.
• Picture outside Picture (PoP): If you use only one monitor, the main
and MulTView™ video windows can be displayed in separate
windows. If you use dual monitors, you can drag the MulTView™
window to the secondary monitor. MulTView™ can be displayed in a
window or full-screen in the secondary monitor.
MulTView™ controls include channel up/down, mute/unmute, audio, swap
channel, volume slider, and channel status. When MulTView™ is in focus,
you can also type a channel number or name to change channels.
To enable MulTView™
In the MulTView™ Initialization Wizard, click Enable MulTView™ .
To open and close MulTView™
1 Right-click the control panel or the video panel.
2 In the Feature menu, click Multview , and then click Show.
European TV +
TV SCART + TV
(S-Video /
composite video) UNSUPPORTED CONFIGURATION
Display
Configuration Connector(s)
Used Comments