American Aimers V100 Photometric Headlight Aimer - Manual (Page 19)

✺
FREQUENTLY ASKED QUESTIONS
For best performance, we suggest the track be used to prevent the aimer from moving of f parallel when rolling
the unit to the left and right side of the vehicle. However , if the shop floor is clean and smooth then the track
may not need to be used.
No, the track does not need to be mounted to the floor .
Yes, extra track is available for purchase in 2 sections of 4 feet each.
The track can be stored inside the mast.
The track does not have to be square with the vehicle, only the aimer does. See the Troubleshooting Guide,
“Misaligning Lamps.”
No, the floor slope scale is designed to compensate for the track thickness.
The Vision 100 is covered by a 90-day replacement warranty and a full year parts and labor .
Yes, but non-registered units will require longer processing time and cause unnecessary confusion. You will
also need to include purchase documentation. If a registration card was not received with the V100, call
1-877-343-7703 and one will be sent to you. If registration cards are lost in the mail, we will accept a
proof of purchase with a legible date of purchase for warranty coverage.
Answers Questions
1. Do I have to use the track with
my Vision 100?
2. Do I need to mount the track
to the floor?
3. Can I purchase extra track for
extra bays?
4. Where can I store the track
when not in use?
5.Do I have to square the track
to the vehicle every time I set
the unit up?
6. Will I need to compensate for
the track when setting floor
slope?
7. What kind of warranty does
the V100 have?
8. Will I still be covered by the
warranty if I do not send in my
registration card?
Page 19