Introduction / contents, Vision 100 optical headlamp aimer, Instruction manual – American Aimers V100 Photometric Headlight Aimer User Manual
Page 2
INTRODUCTION / CONTENTS
Vision 100
Optical Headlamp Aimer
Congratulations! You now have the most
affordable and easiest to use photometric
headlamp aiming device in the world. The
Vision 100 Optical Headlamp Aimer
provides factory-precise aim analysis to
the automotive aftermarket. Precision
laser positioning, high technology
photometric analysis, and computer-quick
calculations make the Vision 100 one of
the most accurate headlamp aiming
devices available.
The versatility of the Vision 100 enables
you to aim nearly any headlamp on any
make of vehicle sold in North America.
Standard, auxiliary, fog, rectangular,
round, or aerodynamic headlamps can be
precisely aimed, regardless of size.
The precise accuracy of laser technology
is used to determine the vehicle centerline.
Computer image processing technology
forms the basis for the Vision 100. It
analyzes the light pattern as it would
appear on the roadway ahead of the
vehicle. Upon positioning the Vision 100 in
front of the headlamp, the headlamp low
beam is analyzed and with simple
directional arrows the user is directed to
adjust the headlamp until a graphic X on a
digital display shows that perfect aim has
been achieved. Aiming pads or adapters
are no longer a necessity. And the Vision
100 will not become obsolete when new
headlamp designs are introduced.
Instruction Manual
Table of Contents Page(s)
Introduction / Contents----------------------2
Vision 100 Optical Aimer
Contents
Vision 100 Preparation-----------------------------3
Aimer Assembly
Battery Pack
Aimer Test
Vision 100 Component Description-----------4
Vision 100 Parts Identification
Set Floor Slope---------------------------------------5
Vehicle Set Up and Aimer Alignment---------6
Vehicle Set Up and Aimer Alignment---------7
Aimer Alignment to Lamp------------------------8
Position Aimer
Find Optical Center of Lamp
Lamp Audit / Lamp Aim -------------------------- 9
Vertical Beam Aim Guidelines
Audit Lamp
Aim Lamp / Aim Other Lamps
Aim Guidelines / Internal Screens------------10
Vision 100 Calibration-----------------------------11
Equipment Calibration
Specifications----------------------------------------12
Trouble Shooting-------------13, 14, 15, 16 & 17
Frequently Asked Questions-------------------18
Notes---------------------------------------------------19
Warranty--------------------------------(Back Cover)
This user manual should be read in its
entirety before operating the Vision 100.
If you have any questions, please contact
a American Aimers, Inc. representative, at
877-343-7703 for information and
assistance.
Page 2