Asante Technologies 8000 - Manual (Page 132)

Advanced Management
Page 4-42
Configuring VLAN Forbidden Sets
Each switch keeps a list of ports that are not to be added to a VLAN by
GVRP. You specify the set of forbidden portsper VLAN. To access the
VLAN Forbidden Set Configuration Menu, type f from the GVRP
Configuration Menu. A screen similar to Figure 4-16 appears. Use the
commands at the bottom of the menu to select a VLAN.
Figure 4-16 VLAN Forbidden Set Configuration Menu
1
Use the commands at the bottom of the menu to select a
VLAN.
2
Type a to add a list of ports to the forbidden set, or type d
to delete a list of ports from the forbidden set. Then fol-
low the instructions.
IntraCore 8000 VLAN Forbidden Set Configuration Menu VLAN Index: [01]
Module Port List 1 8 9 16 17 24 25 32
====== ======== ======== ======== ========
1 +: Member -------- -------- -------- XXXXXXXX
2 -: Not Member -------- -------- -------- XXXXXXXX
3 --XXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
4
5
6
7
8
<Cmd> <Description>
a Add ports to Forbidden Set
d Delete ports from Forbidden Set
Command>
Select VLAN Next VLAN Previous VLAN Quit